ET-86v2g-a23-v1.5 100% Working Firmware

ET-86v2g-a23-v1.5 100% test ok file working

[GUIDE][ROOT][TWEAKS] Generic Allwinner A23 Tablet

et-86v2g-a23-v1.5 100% test ok file working  
I recently bought another tablet off of eBay. This time, it's a very generic one. It does have branding and such, and calls itself "Hypertab", but it is no different from the other generic tablets with the same specs.
System Specifications
  • Android 4.2.2 Jellybean
  • Allwinner A23 - Cortex A7 Dualcore CPU 1.5GHz
  • Mali-400 GPU
  • 512MB DDR3 RAM
  • 2GB Inernal Flash Memory (Actual usable amount is less) + Expandable with MicroSD up to 32GB
Disclaimer (Please Read Before Continuing.)
I am in no way, shape or form, responsible for the outcome, positive or negative, of you following the provided instructions on this thread.
It worked for me, but that does not mean it will 100% work for you. You are responsible for any side effects and damage caused to your device, your property, anyone nearby, or yourself, which includes, but not limited to: software and/or hardware destruction of the device, robbery, riots, injury, death, acts of god, epidemics/pandemics, natural disasters, government shutdowns, mutations, getting a certain limb of your body stuck in a ceiling fan, etc. Rooting WILL void your warranty (if there is any).
Root Guide
Preparing to Root
Rooting the Device
  • Using a USB cable, connect your tablet to your computer.
  • Wait until Drivers are installed and Kingo Root Detects your tablet.
  • Hit "Root" or "Root Again" (as it said for my tablet).
  • Wait until Kingo Root finishes its magic.
  • Once Kingo finishes, and says that root was successful, reboot your device, and you can close Kingo Root.
  • Go to the play store (or Google the APK if you don't have Play Store) and download SuperSU or something similar.
Congratulations! Your Generic Allwinner A23 Tablet is now (or should be) rooted! To check that you have root permissions, download Root Checker from Google Play store or any other store. Tweaks
Now that you have rooted the tablet, let's mess around with the system so it works as you want it to work!
Overclocking/Underclocking
Just use No-frills CPU Control (https://play.google.com/store/apps/d...rillsCPU&hl=en)
The tablet by default spins at 1.2 Ghz. It can be put up to it's maximum, 1.5. On mine, I also have the option of going to 2.0 GHz, but I've never tried it yet.
build.prop
Now this is an interesting one. I found some lines in the file that are interesting, and it seems editing some of them are quite helpful, especially with the battery life and performance. I've listed them below. In order to edit the file, I used JRummy's Build Prop Editor (https://play.google.com/store/apps/d...p.editor&hl=en).
chiphd.bright.max - The highest brightness for the display.
chiphd.bright.min - The lowest brightness for the display.
ro.hwa.force - Force GPU rendering. True/False
video.accelerate.hw - GPU rendering for videos. 0/1
The rest of the lines are quite common among all the devices I've seen so far, and frankly, googling "build prop battery saving tweaks" will do fine for them.
Have more tweaks? Just add them on to the thread, and I'll post them here with your name
FAQ
Is there a custom recovery for this tablet? Nope.
Is there a custom rom for this tablet? Nope.
Why? Nobody seems to know why but Allwinner is a bit hard-a'd about releasing the code so people can develop from it. They are also violating GPL in many ways so most threads about Custom Roms for these kind of tablets gets closed up on XDA.

working file 100%% full options working
Download Firmware

Karbonn A66 Hard Reset or Pattern Unlock done

Karbonn A66 Hard Reset or Pattern Unlock done


This tutorial tested by me without any risk, just need to remember some impotent notes for data, if you use this tutorial then remember first if you use this tutorial then you can't save data like contacts, mp3, videos, photos because this is factory reset so remember this topic because impotent this step and also check your device battery if low so you can't use this tutorial and check also volume up and down key and power because if this tutorial use then need to three keys for hard reset. You can done problem like Pattern lock, restarting problem, hang on logo, security lock from this tutorial.

Procedure:

1. Turn Off your device and take out of battery
2. Insert battery into device
3. Press and hold Volume Down + Power until intex logo then leave Power key pressing continue Volume Down key until Factory Mode
4. Choose "Clear eMMC" from Volume Down key
5. Press Power key for select
6. Wait until Auto Reboot device
7. You are done

I Try this device then i take picture for Proof:


Note : For Go Up - Volume UP keyGo Down - Volume Down keySelect Power key

Intex Cloud Y4 Hard Reset or Pattern Unlock done

Intex Cloud Y4 Hard Reset or Pattern Unlock done


This tutorial tested by me without any risk, just need to remember some impotent notes for data, if you use this tutorial then remember first if you use this tutorial then you can't save data like contacts, mp3, videos, photos because this is factory reset so remember this topic because impotent this step and also check your device battery if low so you can't use this tutorial and check also volume up and down key and power because if this tutorial use then need to three keys for hard reset. You can done problem like Pattern lock, restarting problem, hang on logo, security lock from this tutorial.

Procedure:

1. Turn Off your device and take out of battery
2. Insert battery into device
3. Press and hold Volume Down + Power until intex logo then leave Power key pressing continue Volume Down key until Factory Mode
4. Choose "Clear eMMC" from Volume Down key
5. Press Power key for select
6. Wait until Auto Reboot device
7. You are done

I Try this device then i take picture for Proof:


Note : For Go Up - Volume UP key, Go Down - Volume Down key, Select - Power key

Karbonn A26 Firmware Download here

Karbonn A26 Firmware Download here


This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

MTK 6572 - Karbonn_A26_v1.1_20130907 Download here
Karbonn_A26_V201_20130710 Download here
Karbonn_A26_v2.2_20131220 Download here

[Tool] PassCode Reader For Jailbroken IDevices (BruteforceTool)

[Tool] PassCode Reader For Jailbroken IDevices (BruteforceTool)

PassCode Reader For Jailbroken Idevices (iOS5.x-iOS8.1.3)




: Instructions :

You need to connect your jailbroken idevice in Passcode requiring screen and click Bruteforce button. Your device will be getting many reboots. its depending in your Passcode digits , will run all 0000-9999 possibilities . After boot-up completely click again in Read Passcode button your Passcode will show up.

>>It will only work on ios 6 to ios 8.1.3. For later versions, TwizzyIndy said he will try to make support.

Download Link HERE

Intex Aqua SX flash done

Intex Aqua SX flash done


This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Intex SX Firmware or Tool download here

Required for flash:

1. Intex Aqua Sx device with battery charged
2. Intex Aqua Sx firmware or tool
3. Micro usb cable
4. Computer or Laptop

Procedure:

1. Download firmware or tool from above link
2. Extract to desktop or as you like path
3. Open Intex_Aqua_SX_V01_Indian_NO SMS folder and choose SP Flash Tool v3.1344.214 folder
4. Open Flash_tool.exe
5. Click on Scatter button and choose MT6575_Android_scatter file from Firmware folder
6. Now Click on Download button (shortcut key : F9)
7. Press and Hold Volume Up button and insert usb cable
8. Wait until full flash
9. You are done
Intex Aqua Sx flash done screenshot:


iball Andi4.5z Hard Reset or Pattern Unlock done

iball Andi4.5z Hard Reset or Pattern Unlock


This tutorial tested by me without any risk, just need to remember some impotent notes for data, if you use this tutorial then remember first if you use this tutorial then you can't save data like contacts, mp3, videos, photos because this is factory reset so remember this topic because impotent this step and also check your device battery if low so you can't use this tutorial and check also volume up and down key and power because if this tutorial use then need to three keys for hard reset. You can done problem like Pattern lock, restarting problem, hang on logo, security lock from this tutorial.

Procedure:

1. Charge your battery up to 80%
2. Press and Hold Volume Down + Power button until Select Boot Mode option

3. Now Choose Recovery Mode from Volume Down button 
4. Press Volume Up for Enter menu
5. Choose "wipe data/factory reset" from Volume Down button then Press Volume Up button

6. Next Choose "Yes -- delete all user data" from Volume Down button and then Press Volume Up



7. Reboot your device
8. You are done

Note : Volume Down button for Select, Volume Up button for Ok