Samsung Galaxy Y Dous GT-S6102 Flash done 100% tested by me
Samsung Galaxy Y Dous GT-S6102 flash done 100% tested by me
Model screen shot:
Note : Your mobile battery must be 80% charged
Procedure:
1. Press and hold volume down + home + Power for download mode
2. again press Volume up button for download mode
3. connect your mobile in pc via usb cable (remember:must you have to installed drivers)
4. go to download folder and open odin flash tools and select firmware see below
2. again press Volume up button for download mode
3. connect your mobile in pc via usb cable (remember:must you have to installed drivers)
4. go to download folder and open odin flash tools and select firmware see below
- click on --> PIT and select --> torino_1205.pit
- click on --> Bootlader and select --> BOOT_S6102DXLC2_REV01.tar.md5
- click on --> PDA and select --> PDA_S6102DXLC2_REV02.tar.md5
- click on --> PHONE and select --> MODEM_S6102DXLC2_REV01.tar.md5
- click on --> CSC and select --> GT-S6102-MULTI-CSC-OLBLC2.tar.md5
5. now click on start button and wait till flashing
Success flash screen shot:
 |
Download firmware from HERE
Categories:
Samsung Galaxy y dous GT-S-6102
